University of North Texas

Aug 23-24, 2018

8:30 am - 4:30 pm

Instructors: Pamela Andrews, Lauren Ko, Kristy Phillips, Mark Phillips

Helpers: Jason Ellis, Gio Gottardi

General Information

Software Carpentry aims to help researchers get their work done in less time and with less pain by teaching them basic research computing skills. This hands-on workshop will cover basic concepts and tools, including program design, version control, data management, and task automation. Participants will be encouraged to help one another and to apply what they have learned to their own research problems.

For more information on what we teach and why, please see our paper "Best Practices for Scientific Computing".

Who: The course is aimed at graduate students, faculty, staff, and other researchers. You don't need to have any previous knowledge of the tools that will be presented at the workshop.

Where: Willis Library, Room 443, 1506 Highland St., Denton, TX 76203. Get directions with OpenStreetMap or Google Maps.

When: Aug 23-24, 2018. Add to your Google Calendar.

Requirements: Participants must bring a laptop with a Mac, Linux, or Windows operating system (not a tablet, Chromebook, etc.) that they have administrative privileges on. They should have a few specific software packages installed (listed below). They are also required to abide by Software Carpentry's Code of Conduct.

Accessibility: We are committed to making this workshop accessible to everybody. The workshop organizers have checked that:

Materials will be provided in advance of the workshop and large-print handouts are available if needed by notifying the organizers in advance. If we can help making learning easier for you (e.g. sign-language interpreters, lactation facilities) please get in touch (using contact details below) and we will attempt to provide them.

Contact: Please email lauren.ko@unt.edu for more information.


Surveys

Please be sure to complete these surveys before and after the workshop.

Pre-workshop Survey

Post-workshop Survey


Schedule

Day 1

Before Pre-workshop survey
09:00 Automating tasks with the Unix shell
10:30 Coffee (10 minutes)
12:00 Lunch break (1 hour)
13:00 Building programs with Python
14:30 Coffee (10 minutes)
16:00 Wrap-up
16:30 END

Day 2

09:00 Version control with Git
10:30 Coffee (10 minutes)
12:00 Lunch break (1 hour)
13:00 Building programs with Python, part 2
14:30 Coffee (10 minutes)
16:00 Wrap-up
16:30 Post-workshop Survey
16:40 END

We will use this collaborative document for chatting, taking notes, and sharing URLs and bits of code.


Syllabus

The Unix Shell

  • Files and directories
  • History and tab completion
  • Pipes and redirection
  • Looping over files
  • Creating and running shell scripts
  • Finding things
  • Reference...

Programming in Python

  • Using libraries
  • Working with lists
  • Reading and plotting data
  • Creating and using functions
  • Loops and conditionals
  • Defensive programming
  • Reference...

Version Control with Git

  • Creating a repository
  • Recording changes to files: add, commit, ...
  • Viewing changes: status, diff, ...
  • Ignoring files
  • Working on the web: clone, pull, push, ...
  • Resolving conflicts
  • Open licenses
  • Where to host work, and why
  • Reference...

Setup

To participate in a Software Carpentry workshop, you will need access to the software described below. In addition, you will need an up-to-date web browser.

We maintain a list of common issues that occur during installation as a reference for instructors that may be useful on the Configuration Problems and Solutions wiki page.

The Bash Shell

Bash is a commonly-used shell that gives you the power to do simple tasks more quickly.

Windows

Video Tutorial
  1. Download the Git for Windows installer.
  2. Run the installer and follow the steps below:
    1. Click on "Next" to accept the license.
    2. Click on "Next" to confirm installation location.
    3. Click on "Next" with recommended components selected.
    4. Click on "Next" to create a "Git" Start Menu folder.
    5. Change the dropdown to "Use the Nano editor by default" and click on "Next".
    6. Keep "Use Git from the Windows Command Prompt" selected and click on "Next".
    7. Keep "Use the OpenSSL library" selected and click on "Next".
    8. Keep "Checkout Windows-style, commit Unix-style line endings" selected and click on "Next".
    9. Change the selection to "Use Windows' default console window" and click on "Next".
    10. Click on "Install" to keep the recommended selections and install.
    11. Click on "Finish".
  3. If your "HOME" environment variable is not set (or you don't know what this is):
    1. Open command prompt (Open Start Menu then type cmd and press [Enter])
    2. Type the following line into the command prompt window exactly as shown:

      setx HOME "%USERPROFILE%"

    3. Press [Enter], you should see SUCCESS: Specified value was saved.
    4. Quit command prompt by typing exit then pressing [Enter]

This will provide you with both Git and Bash in the Git Bash program.

macOS

The default shell in all versions of macOS is Bash, so no need to install anything. You access Bash from the Terminal (found in /Applications/Utilities). See the Git installation video tutorial for an example on how to open the Terminal. You may want to keep Terminal in your dock for this workshop.

Linux

The default shell is usually Bash, but if your machine is set up differently you can run it by opening a terminal and typing bash. There is no need to install anything.

Git

Git is a version control system that lets you track who made changes to what when and has options for easily updating a shared or public version of your code on github.com. You will need a supported web browser (current versions of Chrome, Firefox or Safari, or Internet Explorer version 9 or above).

You will need an account at github.com for parts of the Git lesson. Basic GitHub accounts are free. We encourage you to create a GitHub account if you don't have one already. Please consider what personal information you'd like to reveal. For example, you may want to review these instructions for keeping your email address private provided at GitHub.

Windows

Git should be installed on your computer as part of your Bash install (described above).

macOS

Video Tutorial

For OS X 10.9 and higher, install Git for Mac by downloading and running the most recent "mavericks" installer from this list. After installing Git, there will not be anything in your /Applications folder, as Git is a command line program. For older versions of OS X (10.5-10.8) use the most recent available installer labelled "snow-leopard" available here.

Linux

If Git is not already available on your machine you can try to install it via your distro's package manager. For Debian/Ubuntu run sudo apt-get install git and for Fedora run sudo dnf install git.

Python

Python is a popular language for research computing, and great for general-purpose programming as well. Installing all of its research packages individually can be a bit difficult, so we recommend Anaconda, an all-in-one installer.

Regardless of how you choose to install it, please make sure you install Python version 3.x (e.g., 3.6 is fine).

We will teach Python using the Jupyter notebook, a programming environment that runs in a web browser. For this to work you will need a reasonably up-to-date browser. The current versions of the Chrome, Safari and Firefox browsers are all supported (some older browsers, including Internet Explorer version 9 and below, are not).

Windows

Video Tutorial
  1. Open https://www.anaconda.com/download/#windows with your web browser.
  2. Download the Python 3 installer for Windows.
  3. Install Python 3 using all of the defaults for installation except make sure to check Make Anaconda the default Python.

macOS

Video Tutorial
  1. Open https://www.anaconda.com/download/#macos with your web browser.
  2. Download the Python 3 installer for OS X.
  3. Install Python 3 using all of the defaults for installation.

Linux

  1. Open https://www.anaconda.com/download/#linux with your web browser.
  2. Download the Python 3 installer for Linux.
    (The installation requires using the shell. If you aren't comfortable doing the installation yourself stop here and request help at the workshop.)
  3. Open a terminal window.
  4. Type
    bash Anaconda3-
    and then press tab. The name of the file you just downloaded should appear. If it does not, navigate to the folder where you downloaded the file, for example with:
    cd Downloads
    Then, try again.
  5. Press enter. You will follow the text-only prompts. To move through the text, press the space key. Type yes and press enter to approve the license. Press enter to approve the default location for the files. Type yes and press enter to prepend Anaconda to your PATH (this makes the Anaconda distribution the default Python).
  6. Close the terminal window.